1 / 3
Rock Pi 4b+ 4b Mystery Heatsink Case — zdjęcie 1
1 / 3

Rock Pi 4b+ 4b Mystery Heatsink Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A case to use along with this heatsink

Ocena
5 / 5
Polubienia
8
Pobrania
51
Wydruki
1
Wyświetlenia
207
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I ordered a few Rock Pi 4b+ SBCs and the heatsinks:
https://www.embeddedcomputers.ca/product/aluminum-heatsink-case-for-raspberry-pi-4/
But what I got were similar, but not the same, heatsinks. They're wider with 8 holes instead of 4. They look like these heatsinks that they're selling with their 3d printed cover:
https://www.embeddedcomputers.ca/product/radxa-rock-pi-4b-heatsink-case/

I don't know what the heatsink is. Please leave a comment if you do. I asked embeddedcomputers.ca support, but never got a reply. I have included a picture of what it is. Note the 8 holes, instead of 4, and the wider dimensions than the official Radxa Rock Pi 4b case. It may also be part of the metal case for the quad or penta sata hat as seen here:
https://www.cnx-software.com/2024/03/21/radxa-penta-sata-hat-adds-up-to-five-sata-drives-to-the-raspberry-pi-5-for-nas-applications/

Hardware required:
4x M3 bolts. 12-20mm in length. They thread directly into the plastic.

Created in Onshape
https://cad.onshape.com/documents/b48bd037d23546a486f5c5fb/w/469b0d6d4b6fe53f7ededa37/e/778a96783d803c2110e9b2af?renderMode=0&uiState=6a4675af3c4a31ee1ce2e11f