OP 711 PLA Base Corner Moulding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner baseboard for round corners to match OP 711 7/16 in. x 5/8 in. x 3-1/2 in. Baseboard
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I couldn't stomach paying over $4 each for MDF or wood corners to match the baseboard to repair my house. So here they are at about 48 cents for 4 if you believe slicer price calculation. These mount, prime and paint just like the wood ones I have installed. I have installed them using 16 gauge brad nails from a nail-gun and also with adhesive.
Printed in matte white PLA for my case. They are as close to a 1:1 I could manage to the wooden one I had in hand.
3-4 layer walls for extra vacuum bump resistance with 15-20% Gyriod or Adaptive Cubic infill seems to work best.
Don't mind my horrible filling and priming job. I guess caulk and paint don't make me a baseboard installer I ain't after all.