Centauri Carbon 1 Canvas minimal tophat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist tophat utilizing acrylic panels and original glass top
- Ocena
- 4,125 / 5
- Polubienia
- 104
- Pobrania
- 468
- Wydruki
- 12
- Wyświetlenia
- 3051
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Lowers canvas and routes with a side bracket. The core hat is broken into 4 pieces with puzzle joiners.
For my installation, I glued all pieces together and glued panels in place. Panel sizes are 6"x13" x <3mm.
Much more quiet :)
Edit 7/29/2026: I have had one user mention that the canvas cable does not allow side mounted spools to fit ideally. I do not have experience with this, as my filament is located in a separate dryer, not side mounted. Sorry!
EDIT 7/7/2026: I have added a version that uses 6x12" panels instead of the original 6x13". You should now be able to purchase a single 12x24" sheet and break into 4 strips.
EDIT 7/17/2026: Originally the model allowed for panels with thickness less than 3mm (1/8 inch is 3.175mm, causing issues). I have updated to include a model that has the panel thickness increased to 0.13 inches, allowing for clearance for 1/8 or 3mm panels. Please verify you have the correct sizing before printing/purchasing! Additionally, I have increased the through hole height to be about 4" above the lip of the printer from 3.5", and increased the through hole size to be 0.6 from 0.5 inches. This is uploaded as v5
EDIT 8/3/2026: Added .step file to make remixes easier. Listed as cc_tophat_crown_step.stp Thanks!