Fast(est) Printing Modular Drawer System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drawer system that prints fast and is stable | No supports | No hardware | Grows with your needs
- Ocena
- 4,833 / 5
- Polubienia
- 939
- Pobrania
- 1485
- Wydruki
- 6
- Wyświetlenia
- 13 338
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Fast(est) Printing Modular Drawer System
An ultra-fast printing, sturdy, and versatile modular drawer organizer designed for workshop, office, or desk storage. Expandable in any direction without hardware or glue. Combine single, double, or wide modules Press-fit assembly.
Print Settings & Filament
Frame and Connectors: MUST be printed in PETG (or better) for flexibility and strength
Regular Drawers: Can be printed in PLA
Optional Ultralight Drawers: also need PETG (or better)
Supports: None
Modules / Dimensions
Single drawer module: 15 x 7,5 x 5,7 cm / 6 x 3 x 2,2 in (LxWxH)
Double drawers module: 15 x 7,5 x 2,6 cm / 6 x 3 x 1 in
Wide single drawer module: 15 x 14 x 5,7 cm / 6 x 5,5 x 2,2 in
Wide double drawers module: 15 x 14 x 2,6 cm / 6 x 5,5 x 1 in
Assembly of Frame
First, insert the connectors into the designated openings of the frame and stand the module upright. Then gently tap every corner into place —e.g. with a small hammer. No glue needed. Optionally include top cover for upper module.
Connect the individual units horizontally and/or vertically using the included snap-fit clamps (here in orange). The easiest way is to place the frames side by side on their fronts /backs and push the connectors down.
