1 / 2
Ratchet with 12mm hole and 8mm hex attachment — zdjęcie 1
1 / 2

Ratchet with 12mm hole and 8mm hex attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to fit over a 12mm threaded rod, with an additional attachment to connect a drill to it.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I made this to connect a drill with a brake to a shaft. This allows the shaft to keep rotating after the drill has stopped to protect the drill's brake.  

Printing:

The provided files contain all parts, though I suggest printing the drill attachment separately if using a bed slinger, or adding a brim for additional bed adhesion.  

The ratchet is printed with PETG, 3 perimeters and ironing at 15% volume and 0.15 mm gap. 
The holder just has 3 perimeters and is also printed from PETG.

Post Processing:

After printing you're going to need a pair of pliers or vise grips(may want to put something in the hole to make it more rigid) to spin the center and break it loose, and it's going to take a bit of breaking in until it runs smoothly.

Modifying:

The ratchet_ring_15-30 freecad file would be the best to modify since it has more stuff set via variables instead of hardcoded in the sketches. Just playing with the variables is likely to break stuff, especially the prong geometry.

Tagi