Re:Zero Roswaal Manor diorama architecture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Re:Zero" (LN/anime) themed architecture designed for a bookshelf diorama. Emilia figure *not* included :)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial
I modeled these parts for a diorama based on the Roswaal Manor from Re:Zero, featuring this Emilia figure which fits under the pavilion: https://myfigurecollection.net/item/415032. The diorama itself is built into a row of my 35" wide IKEA HEMNES bookshelf.
Design notes:
The full pavilion at 100% scale is 260mm tall and 210mm wide/deep.
The wall parts have space for two light novel books (I originally planned on modeling the facade of the manor for this part of the diorama)
Source .f3d files are included, if you want to adjust dimensions or make other edits.
Printing notes:
I printed each part using HATCHBOX Magic Stone PLA and then post-processed with some sandstone spray paint, fake snow, and other detail elements.
I just printed the right half to fit against the edge of my bookshelf, but you could also print the full version.
Some parts need supports, and organic/tree supports can be easier to remove than grid/snug supports.
Pavilion assembly notes:
Set the "bench" parts on a flat surface
Stack the "top" part on top (there are slots for alignment, glue is optional to fix into place)
Stack the "roof" part on top (there are pegs for alignment)
Stack the "dome" part on top (there is a slot for alignment)