Exploding Spinning Top / Expanding Arms Spinning Top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spinning top that launches its arms into the air with the help of centripetal acceleration while its spinning!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A fun model to show centripetal loads in action. As the model spins, the arms inside shoot outwards. The model is print-in-place and requires no assembly after printing. However, for a nice and smooth print please follow the following print setting recommendations.
Print Setting Recommendations
Layer Height: 0.16 mm
Outer Wall: ~ 100 mm/s (slower speeds will give more precise results)
Supports ON BUILD PLATE ONLY
Enforce supports on a small cube around the base so that it doesn't fail see picture:
After Print Recommendations
The first time you print the spinning top the arms motion inside the spinning top will be a bit stiff. To get the best experience, after you print the spinning top gently push the arms back and forth to loosen the mechanism inside.
Enjoy!