BC250 meets DeepCool CH160 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of adapters to fit a BC-250 into a DeepCool CH160 Plus mATX case
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3-pieces kit to properly mount your BC250 into a DeepCool CH160 Plus
PSU relocated to the bottom of the case
120mm or 140mm fan installed right in front of the BC250, pushing fresh air directly to the VRM and PSU connectors
Active VRAM backplate cooling via 80mm or 92mm slim fan
Available panel functions
USB-C and 2xUSB3 : via an USB splitter (see below)
Momentary power button : via a 5V optocoupler/relay (see below)
Hold 1s to switch the power on
PSU will automatically switch-off after system shutdown
Power button led : via an ATX breakout board
Possible cooling solutions
240mm AIOs (280mm might also fit, now there no PSU at the top of the case anymore)
Tower coolers up to 160mm tall, such as AK500S Digital SE on the picture)
Any top-down cooler
Printed parts
ATX Adapter + IO Shield |  | Compatible with 92x15mm, 80x15mm and 80x10mm fans. Remove case's threaded posts before installation. Requires 3 x M3x heated inserts [1]. Download latest version here : https://www.printables.com/model/1743485-bc250-to-atx-case-adapter USB ports can be routed internally using this top-down USB connector : https://www.amazon.fr/dp/B0BNKFSQHZ |
PSU Shroud (Generic Flex ATX) + Backplate |  | Requires 4 x M3 heated inserts [1] on the backplate + 2 x M3 on the PSU bed. Just slide the PSU into place. |
PSU Shroud (MetalFish Flex ATX) + Backplate |  | Enables a quieter and more efficient cooling solution for your Metalfish PSU (300W-500W). PSU cables can be hidden at the back. PSU's top cover and 40mm fan must be removed. A 80mm fan should be connected to the internal PSU 2-pins fan connector [2] Requires 4 x M3 heated inserts on the backplate + 4 x M3 on the PSU bed [1] Compatible with 80x10mm fans (15mm might fit, not tested), such as : https://www.amazon.fr/dp/B0CZRY8BRR |
ATX Power and USB splitter Mount |  | Mounts at the front / bottom (below the intake fan). Requires 11 x M3 heated inserts [1]. ATX Breakout board (optional): https://www.amazon.fr/dp/B0834RNJX5 Optocoupler (optional): https://www.amazon.fr/dp/B07DJ4NRC1 USB splitter: https://www.amazon.fr/dp/B0CGFBZQKL |
[1] Please note that all M3 inserts are 5mm(D) x 4mm(L)
[2] If the fan doesn't start, swap the red and black wires on the fan connector
How-to connect the optocoupler to the ATX breakout board
Relay | Color | ATX Breakout Board | Other |
|---|---|---|---|
NO | Blue | CON | |
COM | Green | POWER | |
NC | - | (leave empty) | |
DC + | Purple | 5V | |
DC - | Brown | GND | |
IN | Blue | bc250 TPMS1 3.3V pin  |
You can also power the USB splitter using the ATX breakout board (5V & GND)