Stamp handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of stamp blocks for rubber, wood, or acrylic stamps, sorted by dimension with an editable FreeCAD file.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a collection of stamp blocks for home cut rubber stamps (of course it also works for wood and acrylic stamps but i use it for rubber stamps)
I printed the models in PLA with 3 walls and 15% gyroid infill and 0.2 mm layer height. I'm sure the settings don't matter that much since the part is quite compact and should print with no problems. Other materials probably also work fine, but be mindful that your glue might not stick as well to different materials.
For the label on top, I just used the stamp on a piece of paper and stuck it to the top of the stamp with some sticky tape.
You can find the files sorted by dimensions. Dimensions are in millimeters.
The file name is as follows:
Name_ X_length x Y_depth x Z_height .3mf
The curve for the grip is always along the y-axis.
 |  |
|---|
I created the files which are probably most useful but if you are unable to find, feel free to download the FreeCAD file and modify it. The dimensions are tied to a VarSet so you can change:
X_length = Lange_x
Y_depth = Breite_y
Z_height = hohe_z
grip radius = Griff_Radius
Have fun printing