Beamcase 2.5in Drive Mount 150IFW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a twin 2.5in HDD / SDD mount for Beamcase configurations using an SFF PSU and a 150IFW layout.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 51
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a twin 2.5in HDD / SDD mount for Beamcase configurations using an SFF PSU and a 150IFW layout. The distance between mounting surfaces is 20.75mm, with a usual 2.5 in HDD being 9mm and an SSD 7mm I suspect vibration damping will be difficult, for those adventurous types, I've included SLDPRT and STEP files.
For printing I would recommend supports, perhaps there is a better way, I've designed it the way I have and tried to reinforce it the best I could, you may get away with less annoying supports printing it on its head (side facing top of case).
I have confirmed fitment with 2.5in drives.
Best of luck!