1 / 3
Mobile AC 2 hose adapter Delonghi PAC EL110 / 2 Schlauch Adapter für Delonghi PAC EL110 — zdjęcie 1
1 / 3

Mobile AC 2 hose adapter Delonghi PAC EL110 / 2 Schlauch Adapter für Delonghi PAC EL110

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improves AC efficiency by making the exhaust of the AC a closed loop (air in air out through a tube).

Ocena
0 / 5
Polubienia
1
Pobrania
29
Wydruki
0
Wyświetlenia
220
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you searched for this you already know what it does. It makes your portable air conditioner not suck "HA". 

This is for the Delonghi PAC EL110 and it seals off the input of the blower which blows the air out of your apartment / house. To make a better seal add a window sealing strip to the sealing surface (the ones with adhesive). The adapter to connect a hose to it can be found under this link:

https://www.printables.com/model/882749-quick-connect-exhaust-hose-mounting-sets-for-porta

The holes in the model should be big enough for Voron heatset inserts (so M3 ones). On the inside you can see other places for heatset inserts, the idea would be incase of the part not fitting so well you could add some reinforcing 3d printed plates, the distance between the holes is 40mm. If I see that it is an issue on mine I will upload them retrospectively. UPDATE: I have printed it and it needs the connecting plates, I have uploaded it here.

There is a groove going around the entire model, the idea is to use some string / wire to mount it on the AC, so you don't have to use screws. 

Be aware:
1) I have to print the model and install it, but I know how hot it is and that many people need these models now. So here I am. UPDATE: I have printed it, it fits together, but it needs the connector plates. atleast at the very edges. 

2) This is a major modification to the AC, I cannot guarantee that this won't either void your warranty or that it is 100% safe. It is reasonable to assume that there is a higher fire risk, so don't let it run without you being in the house. It may also break your AC, check out forums about 2 hose AC conversions to understand the risks. 

Material and print settings: 

I used PETG and a 0,6mm nozzle with 0.3mm layer height, anything goes really, as long as the features are fine and work good enough. 

If you need the model modified because it doesn't fit your printer use your slicer "cutting" option to cut the model into pieces. 

I wish you all a cool summer. 

Tagi