Pavo20 Pro ductless body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert your calm and heavy Pavo20 Pro into a lightweight ductless freestyle beast and unleash its true potential.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Convert your calm and heavy Pavo20 Pro into a lightweight ductless freestyle beast and unleash its true potential. Able to hold both the smaller 550 mAh and the slightly wider 850 mAh battery using the original strap. A battery grip recommended, I cut 2 triangles of the famous ummagrip as shown on photos. Because of the size limitations you can not make the battery side bars thicker, that’s why I reinforced mine with a few drops of superglue.
A bonus advantage- you can use slightly bigger 2.2” props for even more grip. Make sure of proper cable management/clearance.
PRINTING: this is a structural part of the quad, for that reason I do not recommend TPU (maybe a harder one could work). I printed mine in PC blend (CF nylon is too brittle for this). Printed with no supports.