AAA & AA Akku Battery Riser Nitecore D4 Digicharger and others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version to rise AA & AAA batteries so they can charge properly. There is a grip area to remove the riser…
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 148
- Wydruki
- 11
- Wyświetlenia
- 1000
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is my version to rise AA & AAA batteries so they can charge properly.
There is a grip area to remove the riser easily. The "bottom" part of the riser is flat to enable a good access to the batteries.
It is also possible to leave the riser in place and even use them while the charger is mounted to a wall. They will not fall out.
I printed mine in ASA but every more heat resistant materials will work too. I would not recommend PLA.
Have fun and keep printin!
PS: In the pictures the current version is the left riser ;) .
Update 17.01.2024:
Added a V2 to fit other charger too. (I rised the middle part)