1 / 1
canon a-1/ae-1 battery door and latch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement battery door and latch for the canon A-1 and AE-1
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
replacement battery door and latch for the canon A-1 and AE-1.
model is not optimized for fdm printing, needs a lot of support material and post processing. i will probably upload a optimized model in the next few months or so.
part as shown was printed in petg with a 0.4mm nozzle (0,2 recommended, asa/abs might be better for post processing) finished with black spray paint and a few layers of clear coat. the leather texture in the photo is an actual piece of leather. you could probably get similar results with bumbmesh.