TeensyROM+ (v0.4) Exposed Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the TeensyROM+ (v.04) Commodore 64 multifunction cartridge
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for the TeensyROM+ multi-function C64 cartridge by Travis/SensoriumEmbedded.
Holy Paperclips Batman! Updated by request: Case tops now include paperclip hole access to programming button. No more taking the cover off for USB firmware updates.
There are three versions of the top cover. They differ only by how the lettering is printed:
* TeensyROM+ Case Top -- "TeensyROM+" is part of the top
* TeensyROM+ Multicolor Case Top -- "TeensyROM+" letters are separate parts (as in photos)
* TeensyROM+ Case Top Recessed -- "TeensyROM+" is sunken into the top
Note: NPH versions have... No Paperclip Hole.
TeensyROM+ case-bottom is used for all of the above and you will need two of TeensyROM+ button
The power led for the TeensyROM+ is directly under the letter O and the center of the O has a hole to allow insertion of a short piece of standard transparent or translucent filament to make the LED more visible. The longer the piece, the brighter the glow.
Because many printers will slightly close or distort a small hole where it meets the build plate, the paperclip hole may need to be opened up a bit. If necessary, insert your favorite paperclip from the inside of the case top, and while gently twisting and pushing, clear the hole.
Like the original by @0ldSkull , there is no need for supports. A 3mm x 12mm (or so) screw is needed to attach the halves. And be aware; tolerances are tight.