XL Belt Clamp for 1.5GT Gates Belts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt Clamp for upgrading your XL to 1.5GT Gates Belts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I recently updated my two XL-5T printers to Gates 1.5GT belts and drive pulleys. Its a relatively easy conversion and greatly reduces VFDs. The standard belt clamp is for 2mm pitch belts (2GT) that come on the printers and would probably work, but I wanted to create a belt clamp that matched the new belts.
In the picture the clamp on the left is 1.5mm pitch and the clamp on the right is the standard 2mm pitch. If you are using an enclosure you should print this out of PC-CF or PA6-CF. I printed mine out of inslogic PA6-CF.
I hope you find this useful.