Magnetic diffusers for Wuben E8 V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
The Wuben E8 V2 I bought from CountyComm only came with amber diffusers so I recreated them to print in translucent filament.
Two versions are available, the "no_bleed" version aims to prevent line-of-sight to the LEDs underneath and would work well with the red diffusers if you're trying to preserve night vision. The regular version is a closer reproduction of the original shape.
Printing in PETG or PC would be ideal due to heat and impact resistance. I recommend 2 top and bottom layers and experimenting with infill pattern and percentage.
You will need 4mm*2mm circular magnets, the included spare magnets will be too shallow (also lets you keep them as spares for the included diffusers)
Pictured filament: Atomic Translucent Neon Yellow, Atomic Translucent Ruby Red, Polymaker Clear Polycarbonate