1 / 5
Support Fins for Angled Prints — 30°, 45°, 60° — zdjęcie 1
1 / 5

Support Fins for Angled Prints — 30°, 45°, 60°

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Support fins for angled parts.

Ocena
0 / 5
Polubienia
2
Pobrania
40
Wydruki
0
Wyświetlenia
188
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

These STL support fins are meant to be imported into your slicer and assembled with your model before printing. They provide simple, controllable support for angled prints without relying on auto-generated supports.

Use them when you want:

  • Less slicer-generated support material

  • Cleaner supported surfaces

  • Predictable contact points

  • A quick way to stabilize tilted prints

  • Simple sacrificial supports you can place exactly where needed

How to use
Import your model and the desired support fin STL into the slicer. Move, rotate, and scale the fin as needed, then assemble/merge it with the model so it prints as part of the job. After printing, remove the fin like any other support.

Tagi