MG Midget 1500 - Thermostat Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Copy of the thermostat housing off my 1978 MG Midget 1500.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I've copied the thermostat housing off on my 1978 MG Midget, since these seem to be hard to come by these days.
I would use a service like Craftcloud in order to get it SLM printed out of aluminum.
The fill hole in the top is 0.748"Ø, so it can be tapped with a Ø1/2" BSPP tap.
For the plug I would use 50785K826 from McMaster-Carr. It's a nice brass plug with nylon sealing washer.
The model is in inches.
Note: I've haven't gotten this printed, our of aluminum, so I can't 100% guarantee that it will work, but I did print it with my K2 Plus in ASA to make sure it will fit. I don't see why getting it printed out of aluminum wouldn't work.