Pocket flexigrid fidget, small size, 6x6mm per column, parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned the flexigrid with smaller dimensions and low clearance, so the fidget fits small pockets.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 238
- Wydruki
- 2
- Wyświetlenia
- 414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
Should print-in-place fine with your favorite settings, as long as your printer is happy with 0.2mm clearances. I've printed it in PLA and in PETG.
Will probably need some gentle un-sticking after printing; try to put a knife tip between each column and gently twisting until it "clicks", once on the top and once on the bottom. Be careful with your fingers!
stl/step is 5x5 columns, but the f3d file is parametric and I've printed up to 40x40 without issue. The small ones are more satisfying though. Give me a shout if you want a different amount of columns.