1 / 4
Ultimaker 2+(extended) - tall feet to fit electronics under printer + AC power switch mount — zdjęcie 1
1 / 4

Ultimaker 2+(extended) - tall feet to fit electronics under printer + AC power switch mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tall feet to increase the clearance underneath the printer and also mount AC power switch

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is part of my project to upgrade my old Ultimaker 2 Extended+. This part consists of taller feet that increase the clearance underneath the printer, providing enough space for the electronics and allowing an AC power switch to be mounted in one of the feet.

IMPORTANT: To print the back right foot, you need to mirror the "Back Left Foot" model. I highlighted the plane.

When designing these feet, I wanted to reuse as many of the original screws as possible. To install the feet, remove the original screws that hold the frame together, position the feet, and reinstall the screws through the mounting holes.

The AC power switch can simply be pushed into the slot in the front right foot. It is securely held in place by its retaining clips, for which I designed dedicated clearance. It fits snugly and does not move once installed.

Tagi