Clog Customizer 2-Piece Hole Punch Jig Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a clog customiser that acts lie a clamper,can make holes in crocs heel straps to customise them with unique pegs
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey everyone,(sorry that i dont hv the physical printer available right now it has gone for servicing so i made a image in blender-to the judges)
Since clogs only have holes on the front toe box, you can't put charms on the heel strap or the side walls. I made this 2-piece tool kit so you can safely punch perfect 8mm holes anywhere you want on your shoes.
What's in the kit:
The Strap-Punch Jig: A C-clamp that slides onto the heel strap. It has an 8.4mm guide hole on top to keep your punch straight, and a 14mm exit hole on the bottom so you don't ruin the jig.
The Flat Guide Disk: A simple coin-style guide to place flat anywhere else on the shoe.
How to use it:
Get a cheap 8mm hollow leather punch (costs like 150-300rs on Amazon). Slide the jig on, drop the punch in, and tap it with a hammer. Or just heat up an M8 steel bolt with a lighter and push it through the guide hole.
Print Settings:
Print both flat on the bed. No supports needed. Use at least 4 walls/perimeters and 20% infill so they are strong enough to handle the hammer taps.
My printer is currently down, so let me know if the tolerances need any adjusting in the comments. I'll update the files immediately based on your feedback!