Laundry Detergent Cup Drainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A device to store and drain the detergent cup back into a bottle of All laundry detergent.
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 503
- Wydruki
- 5
- Wyświetlenia
- 2579
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update
Use this remix for the larger 237 fl. oz. jugs.
_______________________________________________________
I found this design about 3 years ago on Thingiverse by davwilso.
https://www.thingiverse.com/thing:2748680
I liked the idea but it would not fit the All® brand. I also hate using support! So I designed a new version.
How I Designed This
Like the original designer, I took photos of the cap threads and experimented in Fusion 360 to get the cap part correct (even printed a cap test before committing to the rest of the design).
I looked at several different shapes for the top part. As my goal was no support, I ruled out a circle (support needed at the bottom of the circle).
I also ruled out a square (bridging need across the top).
I also had to give up on the nice curved pipe between the top and cap (again support required).
A triangle had to be too large and waste too much unusable space outside of the drainer's area. Both hex and octagon also need bridging across the top.
I settled on pentagon as the only shape that would need no support and not waste a lot of space. And the connecting tube became a straight pipe on a 45 degree angle due to support.
The first one I made lasted over 3 years Eventually, due to many times being unscrewed and tightened back on, the threaded part suffered layer separation (the only real deficiency in printing in this orientation). On this latest modification, I thickened up the screw cap part.
I recommend brim due to the orientation.
I printed the first version in PLA, and this latest one in ABS. Time will tell which is best.
UPDATE 3/23/2023:
I added a thread test you can print to see if it will fit your detergent bottle. Use the included 3MF file. It is just a cut off portion of the big part and the screw on part - you can print either or both ((I recommend both for the best test).
Also, time has proved that ABS (or maybe ASA) is the better material to use.
UPDATE 10/19/2023:
For the newer jugs with larger caps and cups, use my latest remix. The Fusion 360 design is also parametric if you feel the need to make adjustments.