1 / 1
8x10 to 4x5 glass cutting jig/guide for plate photography
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig to cut down glass
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Jig I made to cut down 8x10 photo frame glass into 4x5 plates. I'm using the linked below mainstays walmart frames that are $2.97, cutting them down nets four 4x5 plates that cost ~80 cents a piece. Cuts nearly perfectly in half, your results may vary. My cutter is about 5.55mm wide, a similar cutter would be needed since I accounted for the cutters width in the design. They fit in the antique century glass plate holder I have.