Articulated Cute Jellyfish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Cute Articulated Jellyfish (Single or Multicolor)
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
ℹ I have created a step-by-step assembly guide, which you can find as a PDF file in the download folder. Please take a moment to read it before starting the assembly.
ℹ Tips for printing:
Filament: PLA
Supports: No!
Layer height: 0.16(0.15)mm or 0.2mm
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: Classic
Detect thin walls: -
Brim: No!
BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
Info‼: Do not scale the Jellyfish any smaller otherwise the connections will no longer work!
Info‼: If you apply too much force to the connections they may break because the connections are small!
Info‼: Please be careful when removing the Jellyfish from the print bed!
------------------------------------------------------
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (4 Colors):
PLA Basic / Yellow
PLA Matte / Orange
PLA Matte / Black
PLA Matte / White
Or decide for yourself which colors and how many you want to use!
ℹ This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!
------------------------------------------------------
ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!
(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)