1 / 3
Halterung für den Längsanschlag Metabo TS250 Tischsäge/ Mounting Bracket for the Metabo TS250 Table Saw's Rip Fence — zdjęcie 1
1 / 3

Halterung für den Längsanschlag Metabo TS250 Tischsäge/ Mounting Bracket for the Metabo TS250 Table Saw's Rip Fence

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Halterung für den Längsanschlag Metabo TS250 Tischsäge / Mounting Bracket for the Metabo TS250 Table Saw's Rip Fence

Ocena
0 / 5
Polubienia
7
Pobrania
13
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Halterung für ein Federbrett oder eine verstellbare Doppelrad-Gleitführungsrolle für Metabo TS250 Tischsäge.

Bevorzugt : 2x Flache M8x30 Sechskantschraube, Kopf maximal 4,5mm höhe wegen der Nut +                                            2x M8 Muttern  und                                                                                                                                                        2x M6x40 Sechskantschrauben mit 2x M6 Muttern

                                                                           oder

2x M6x40 +  2x M6x30 und 4x M6 Muttern

_________________________________________________________________________________

Mounting bracket for a spring-loaded fence or an adjustable dual-wheel sliding guide roller for the Metabo TS250 table saw.

Preferred: 2x flat-head M8x30 hex screws, maximum head height 4.5 mm due to the groove + 2x M8 nuts and 2x M6x40 hex screws with 2x M6 nuts

or

2x M6x40 + 2x M6x30 and 4x M6 nuts