Frameless 64×64 RGB Matrix Desk Stand — Raspberry Pi Chassis for Vinyltron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frameless 64×64 RGB matrix desk stand: Pi 3B + Adafruit Bonnet in one print. 10° lean. Built for Vinyltron.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Minimal rear chassis for the P3 64×64 HUB75E matrix display. No bezel: the panel floats edge-to-edge, all LEDs. Single printed part.
Two vertical rails bolt directly to the panel's rear M4 boss columns using the magnetic screws that ship with the display. Raised 9mm seat rings clock up the magnet standoff height so everything clamps flush. A crossbar carries a Raspberry Pi 3B on M2.5 thread-forming standoffs. Wedge feet set a 10° backward lean, coplanar by construction.
FITS
Seengreat P3(2121)-32S 64×64, 192×192mm (boss columns ±86.5mm, holes at y=0 / y=73mm)
Raspberry Pi 3B
Adafruit RGB Matrix Bonnet #3211 (optional)
HARDWARE NEEDED
4× M4 magnetic screws — the ones that shipped with the panel
4× M2.5 screws — thread into 2.2mm pilots, no inserts
PLA or PETG - 0.2mm · 15% infill · ~75g · no supports · flat on the bed Fits any 250×210mm or larger bed
Parametric source included. Boss coordinates and lean angle are named variables — two-number edit regenerates the part for a different panel revision.
Built for Vinyltron — free Volumio plugin that puts album art, screensavers, and weather on a 64×64 matrix. https://emuck.github.io/vinyltron/