Bosch router table featherboard and protective shield spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesign of the spacers for Bosch RA1811 router table to be more suitable for 3d printing.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Spacers for featherboards & the protective shield on Bosch RA1811 router tables.
Existing models I found just mimic the factory spacers (designed for injection molding) and require supports to print.
This is a ground-up redesign optimized for 3d printing.
The default orientation prints the model upside down at a 30 degree angle with no supports needed.
Rather than relying on a set of prongs inside the track to provide horizontal stability, the spacers hang over the top of the fence.
There's a dedicated spacer for the protective shield that bridges across to seal things off better to help with dust collection