Ryobi 40V Leafblower Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Ryobi 40V leafblower that possesses the clip/slot mount.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 394
- Wydruki
- 5
- Wyświetlenia
- 2282
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A wall mount for the Ryobi 40V leafblower that contains a clip/slot mount (as seen in the pictures). This can vary between leafblower models.
This was remixed from the referenced model to make it sturdily wall mountable.
This is a two-piece model and you will need an M3 x12mm socket head screw and an M3 nut to join the pieces.
Recommend printing at least the clip piece at 100% infill as it bears significant weight. I printed in PETG as it will be under load in the garage through a wide range of temperatures. May be fine with PLA but I did not want to risk my blower to test it.