IKEA Storsegel Tree Support Lamp Base Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ring-shaped replacement base. Auto-generated tree supports form the decorative stand.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi,
I made a lamp base that replaces the original three wooden legs of the IKEA STORSEGEL lamp.
The model itself is a ring that fits the socket of the original fixture.
The tree support is auto-generated using Orca Slicer. The assembly in the .3mf contains a disc beneath the ring, making it possible for the ring to float while being held by the auto-generated tree support.
The disc also serves as a keep-out zone for the support; therefore, "Support on build plate only" is enabled in the slicer.
The original screws fit nicely and can be screwed in directly.
In my .stl file, an inner part of the lamp socket touches the ring before the standoffs make contact with the socket. The screws are long enough to hold both pieces together anyways, so I didn't bother printing another iteration.
I included the Fusion 360 .f3d file in a ZIP archive, where I raised the standoffs on which the socket attaches to the base.
Printed on an Ender 3 V3 SE with a 0.4 mm nozzle and eSUN PLA Basic "Bone White".