1 / 3
Silicone Bed Mod Tube Cutting Fixture for Prusa MK3S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick model I made to make a set of replacement 10 mm silicone tube sections for the silicone bed mod.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 113
- Wydruki
- 6
- Wyświetlenia
- 869
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (1)Kolekcje (26)Powiązane
This is a quick model I put together when I couldn't cut consistent 10 mm length silicone tubes for the silicone bed mod. Works with the recommended 7 mm OD automotive silicone tubing and the cutting slot is 0.5 mm which works well with an Xacto knife. The insert hole came out a little snug but it worked well for what I needed it for. I used Prusament Translucent Green PETG.