Armoured Clash Movement Trays (Large Horizontal) with Handles

This is a set of (Large Horizontal) movement trays (with handles) for Warcradle's Armoured Clash.

Each tray has a front section marked with an ‘O’ for the Officer model (base). This has been designed as the optimum position for the Offier model which aligns with the rule of the officer model should be on the front flank and as close to the centre as possible

There is a maximum of 24 models allowed per unit.

You can print whatever trays you need, rather than printing them all.

I have catered for as many versions as possible that are used normally within the game.

The file codes are as follows:

S=Skirmish (Basic Unit)

B=Battle (Full Strength Unit)

C=Cataclysm (Reinforced Unit)

SB=For both Skirmish & Battle

BC=For both Battle & Cataclysm

H=Handles

hor=Horizontal (walking unit base)

ver=Vertical (non walking unit base)

The handles at the rear of each tray are to help move the tray for those less able to move them normally.

Please click the LIKE (Heart) Button if you like my models. If you really like my my models, then please suppoirt me at: https://buymeacoffee.com/tigertone You can also become a member there to sell my models commercially. All details available there. You can also scan the QR Code below to take you there.

Printing Instructions:

I printed these on my Bambu Lab P2S printer with Bambu Studio Beta v.2.8.0.50 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Sunlu (Bambu PLA Basic profile used)

Colour: Grey

Resolution: 0.2 (High Resolution)

Nozzle: 0.4mm

Print Speed: Standard - 200mm/s (First layer @ 50mm/s)

Nozzle Temperature: 220 Degrees

Bed Temperature: 40 Degrees (BIQU CryoGrip Pro Glacier) - Set as Cool Plate 

Infill: 15%

Infill Type: Gyroid

Supports: No

Brim: Auto / No

Raft: No

Enjoy.