Sayha - Finger Spinners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fidget Finger Spinners My take on finger spinners, with a simple and clean design. Made this using Fusion 360 for the…
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 404
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Fidget Finger Spinners
My take on finger spinners, with a simple and clean design. Made this using Fusion 360 for the first time.
Tri, Duo and Uno versions!
Uses 608 Ball Bearings (8mm core, a 22mm outer diameter and a 7mm width) commonly used in Skateboards.
If you're for extra spin time look for ceramic bearings!
Print Settings
Printer Brand:
RepRap
Printer:
Wanhao Duplicator i3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Post-Printing
Assembly
The bearings should fit tight on the holes and ideally can be pressed in place with your hands and stay secure! If not adjust the scale up or down by 1% increments.
Category: Toys & Games