Portable Abrasive Blaster Hopper_Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A paintball hopper adapter for the Harbor Freight Portable Abrasive Blaster (SKU: 59490).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a hopper adapter for the Central Machinery Portable Abrasive Blaster, from HarborFreight. SKU: 59490
The tool works great, with the exception of the supplied media hopper. The stock hopper is quite small and leads to a lot of down time, reloading the hopper. This adapter allows you to replace the stock hopper with an gravity feed paintball hopper. The is a massive increase in media storage and allows you to work much longer before needing to refill the hopper.
Recommend printing the model as oriented, with supports from the bed only.
4 walls
4 top/bottom layers
15% infill
Other than the above, I printed this model with my standard PLA settings.
To install simply remove the internal hopper screw and back out the front hopper screw.
Gently pull old hopper off the tool.
Push hopper adapter on top top of tool.
Reinstall internal hopper screw into the back adapter screw hole and tighten screw to body of gun.
Tighten front hopper screw to secure front of hopper adapter to media inlet port.
Once hopper is installed push paintball hopper into center opening of adapter and fill with media.
Normal motion of the gun kept the media following for me but a gentle shake may be required to loosen media up and get it to flow in the tool.