1 / 1
IKEA TJUSIG magnetic shoehorn mount - magnetischer Schuhlöffelhalter — zdjęcie 1

IKEA TJUSIG magnetic shoehorn mount - magnetischer Schuhlöffelhalter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fitted for the use of a magnetic metal shoehorn and two neodymium 30x5x2mm magnets. Clips on IKEA TJUSIG side beams.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Diese Schulöffelhalterung ist für einen metallischen, magnetischen Schuhlöffel mit ca 46mm Breite am unteren Ende ausgelegt. Zwei Neodymmagnete mit 30x5x2mm halten ihn am oberen Teil ausreichend fest.

Beide Teile werden auf die Querstreben geklipst und sitzen nicht allzu stramm, klappern aber auch nicht.

Die Fusion360-Datei darf gerne verändert werden, falls andere Magnete oder Schuhlöffel verwendet werden sollen oder ihr andere Toleranzen haben müsst/wollt :)

Gedruckt auf einem Prusa Core One+ mit 0,6mm Düse in PLA in 0.20mm strucutral settings. Druckzeit ca 2h10min.

Bitte natürlich je nach Magneten die entsprechenden Pausen setzen, um die Magnete einzusetzen. Ich habe die Magnete dafür mit einem Tropfen Sekundenkleber im Model fixiert.

Viel Spaß damit!

-- -- -- -- -- -- -- -- -- -- -- -- -- --

This shoehorn holder is designed for a metal, magnetic shoehorn that is approximately 46 mm wide at the bottom. Two neodymium magnets measuring 30 x 5 x 2 mm hold it securely in place at the top.

Both parts clip onto the crossbars and aren’t too tight, but they don’t rattle either.

Feel free to modify the Fusion 360 file if you plan to use different magnets or shoehorns, or if you need or want different tolerances :)

Printed on a Prusa Core One+ with a 0.6mm nozzle using PLA at 0.20mm structural settings. Print time: approx. 2h10min.

Of course, please set the appropriate pauses depending on the magnets so you can insert them. I secured the magnets in the model with a drop of superglue.

Have fun with it!