1 / 3
Anycubic Kobra S1 Max air nozzle / Anycubic Kobra S1 Max Buse d'air — zdjęcie 1
1 / 3

Anycubic Kobra S1 Max air nozzle / Anycubic Kobra S1 Max Buse d'air

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For the Anycubic Kobra S1 Max .stl / Pour le tête Anycubic Kobra S1 Max .stl

Ocena
0 / 5
Polubienia
11
Pobrania
40
Wydruki
0
Wyświetlenia
400
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Part designed by me with a tight press fit. It is intended to fit the STL cover provided by Anycubic. You will need to purchase the magnets (both magnet holes are 5.5 mm in diameter).

I provide the model as either a single-piece version or a two-piece version (to be glued together), depending on your preference.

Printing in ABS or a higher-performance material is recommended.

Pièce modélisée par mes soins, avec un ajustement serré. Elle se monte sur le fichier STL du cache fourni par Anycubic. Vous devrez acheter les aimants (diamètre des deux logements : 5,5 mm).

Je fournis le fichier en une seule pièce ou en deux parties (à coller), selon vos préférences.

Impression recommandée en ABS au minimum.