1 / 3
Husqvarna Vitpilen/Svartpilen 701 Luggage Rack — zdjęcie 1
1 / 3

Husqvarna Vitpilen/Svartpilen 701 Luggage Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjustable Luggage Rack. No modification needed.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I made an adjustable luggage-rack for the Vitpilen and Svartpilen 701 since they are quite tricky to fit with universal stuff without having the luggage rub onto the bike.

No permanent alterations to the bike needed!

Check local laws before putting it on your bike. Use at own risk.

IMPORTANT

Use a VERY STURDY Filament. These parts get hot and have to withstand high forces from your luggage and the screws. I personally printed the angle brackets from PPA-CF, though that might be overkill. Braking of these parts is very much a sefety risk!

PARTS NEEDED (per side)

  • 2x M8x30 (anyting longer than 34mm will not work without washers!) 

  • 3x M5x18

  • 3x M5 Nuts

You can use anything flat as the actual plate. the mounting pattern is a slanted same-sided triangle (side=35mm). The one provided in the files is just an example.

Tagi