Fitbit Air Adapters Commercial Use

All the swivel mechanisms are print-in-place. Please use at least 3 walls and >=15% infill.

The Fitbit clips in only on one side of the adapter. Please print with that side up (if the Fitbit was clipped in, the LED sensor should be facing up), because the other side has slightly bigger area to stick on the plate, no support is needed.

The files are organized as follows:

• double-lengthwise-XXmm.stl

  • The Fitbit Air clips lengthwise with loop openings on both side;

  • The loop opening is XXmm wide, where XX is one of 18, 20, 22, 24.

• lengthwise-XXmm.stl

  • The Fitbit Air clips lengthwise with loop openings on one side;

  • The loop opening is XXmm wide, where XX is one of 18, 20, 21, 22, 24, 26.

• lengthwise-swivel-XXmm.stl (Bestseller)

  • The Fitbit Air clips lengthwise with loop openings on one side;

  • The loop opening swivels to allow comfortable wearing position;

  • The loop opening is XXmm wide, where XX is one of 16, 17, 18, 20, 21, 22, 24, 26.

• widthwise-swivel-XXmm.stl

  • The Fitbit Air clips widthwise with loop openings on one side;

  • The loop opening swivels to allow comfortable wearing position;

  • The loop opening is XXmm wide, where XX is one of 16, 17, 18, 20, 21, 22, 24, 26.

• double-widthwise-swivel-XXmm.stl

  • The Fitbit Air clips widthwise with loop openings on both side;

  • The loop opening swivels to allow comfortable wearing position;

  • The loop opening is XXmm wide, where XX is one of 18, 20, 22, 24.

• double-lengthwise-swivel-XXmm.stl (Bestseller)

  • The Fitbit Air clips lengthwise with loop openings on both side;

  • The loop opening swivels to allow comfortable wearing position;

  • The loop opening is XXmm wide, where XX is one of 17, 18, 20, 22, 24, 25.