Cam Angle Mod - Only Round Magnets - Anti-Warp ABS/ASA brim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a special anti-warp brim to @DvG3DAtelier's remix for easy printing in ABS/ASA.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Since many printed it with PETG successfuly, ASA is definitely not needed here. Yet I have a lot of it and I want to practice printing dimentionally accurate parts with it, which is not a no-brainer. I've been developing a specialized anti-warp brimming/mousing technique which lately got me some nice results, so I used it here as well and indeed it wins again.
INSTRUCTIONS (Important!!!)
1. Before slicing, split the model to objects (in prusa slicer/orca: right click the model -> split part -> to objects). You should have 2 objects - the part and the brim disc. They WILL overlap. Your slicer might give you a warning about it, even a pretty serious one. Ignore the warning!!! Here is why it is needed:
This brimming technique uses a series of small connections to the model in order to be easily broken out. For this to work, lines must never cross from the connectors to the part or vice-versa. If the part and the brim are treated as a single object, the slicer will connect them with same lines and they will leave nasty tears in the part. When treated as two objects no lines cross between them, and the result is optimal. The high proximity is needed for the connectors to apply force on the part and pinn it down to the bed.
2. After slicing you can check the layers to see that no lines cross between the brim and the part.
3. Other than this, default settings should do.
4. The brim connectors will leave orderly white marks on the part. As long as the slicer treated brim as a separate object and didn't create a line crossing with the part, these marks are not tear marks - just the place where two separate lines were pressed together by the nozzle. That's optimal for my needs but may not be optimal for everyone's needs, so be informed. If it does help you, I will take much pleasure in knowing it.
P.S. here is a link to the onshape document: https://cad.onshape.com/documents/d8015946170435e790f59f33/w/c5c03c1615c3beca7ece5ff2/e/8b074095e1de5a329a402019?renderMode=0&uiState=6a4acba694bf875ec5ee4689
