1 / 2
AEG AXP26U338CW ChillFlexPro 150mm 2-hose conversion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix fits a 150mm connector and hose.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The 3mf is cut up to fit a 250mm build plate.
Join Plate 1 + 2; 3 + 4, then join the resulting parts together.
Use the patches to glue over the seams if needed.
I added the connectors to the 3mf as well. They are not my design.
I grabbed them off ORelio's Model.
There is a High and Low Profile Version for the connector
I had good results with PLA and a 0.6mm nozzle.
Minimal support is needed for the tabs. Support for the fillets on the build plate is optional.