Yamaha CT-410 Tuner Tuning Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-replacement for the tuning knob of the Yamaha CT-410 tuner.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
My 50 years old Yamaha CT-410 tuner had been missing its tuning knob since forever. Since I couldn't find any replacement online, I decided to make it myself.
This is my first 3D project ever and I picked up the skills only for this occasion. There's probably room for improvement in the design, but the button fits perfectly and stays on through friction, so it's a bit tight to put on at first.
I'm not exactly sure what the printing settings are, I had this handled by the shop. A bit of sanding with 220 grit was required for the top (flat) part to smooth it down.
Feel free to use and modify this however you need.