Holder for eBadges Micro Badge Maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand that holds the badge maker, cutter, perspex board, and a box for accessories/consumables.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I bought a micro badge maker from eBadges and wanted a holder/stand for it.
There is a rectangular indent for the badge maker itself, a circular indent for the cutter, a vertical slot for the perspex cutting board, and a "box" for accessories/consumables.
It has a dimension of 238mm x 201mm x 124mm, and would fit most standard size printers (not an A1 mini).
I printed it with 10% infill, which took ~340g of filament and 14 hours.
As with any large surface prints, warping is a potential problem. (YMMV, but I find that PETG with a properly heated bed warps less than PLA on a bed slinger.)
I printed mine with PETG but it should work with PLA as well.