Touptek AE676C - 1/4" Screw Mount for Fan module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Touptek AE676C - 1/4" Screw Mount for Fan module (see details below)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print settings:
Material: PETG
Infill: 20%
Perimeters: 5
Layer height: 0.2 mm from 0 to 60 mm, and 0.1 mm from 60 to 70 mm to achieve more accurate thread printing.
This is a case for the ToupTek AE676C camera. It adds a 1/4" mounting point on the bottom, matching the functionality of the version designed for the camera without the fan.
The cage also allows the 3D printed 1/4" mounting point to be removed and replaced with a metal threaded insert for a more durable and permanent solution (see the link below).
The three vertical supports that connect the bottom section to the top lid can be relatively fragile. To increase the rigidity of the enclosure, the design includes the option to install an M3 × 50 mm screw through each support (The upper 20 mm of the model does not include an internal reinforcing screw. Instead, the top lid secures and reinforces the upper section of the case).
The holes are designed with a 3.1 mm diameter and, depending on your printer's tolerances, may require tapping before installation. Take extra care during this step, as it is the most critical part of the assembly and improper installation may cause the supports to crack.
The case is designed to avoid obstructing any of the camera's ventilation openings while maintaining full access to the USB port and the fan's ON/OFF switch.
Case to Lid connection using 3d printed M72x2 10mm connection.
EDIT: Case - Bottom v2 includes a cable hook for the USB C cable