1 / 2
Mold frame for Conway's Game of Life Gliders in two phases. — zdjęcie 1
1 / 2

Mold frame for Conway's Game of Life Gliders in two phases.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A frame for making a silicone mold of Game of Life Gliders that can be used to cast resin objects. Cell spacing is 8mm.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

See this wikipedia page for an introducing to Game of Life and gliders.

This is purely a decorative design for Life enthusiasts, but it is east to print and use if you have silicone and epoxy resin. You can find a more detailed explanation of making a silicone mold in this printable.

The glider goes through 4 phases but its 2-generation successor is glide symmetric with the initial pattern (hence the name "glider"). If you want to cast the other two phases, you can print a mirror image and make another mold.

I used an extra few drops of silicone after curing the molds to smooth out the tops into lens-like shapes. That step is optional, but the mold with otherwise carry the 3d print texture. You can also coat or sand the original.

Tagi