Easy Access INDX Filament Sensor Add-on
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To aid access to filament jammed returning through the run out sensor, due to square, badly cut or curled ends.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I'm still awaiting my First Wave INDX upgrade kit for the CoreONE PLUS, from Prusa, and after seeing Filamentalist's upgrade to the R1, and R2 filament sensor parts for the INDX system, I saw the same issues I've had with the MMU2 and MMU3.
Filament ends are not tapered, like its been rammed into the nozzle, they are square, badly cut, even bent, or have tape attached, so will go through the sensor but not back.
So I've designed this add-on to the INDX, files, gained from Filamentalist's upgrade, which alows a tapered bowden plug to fit into a module which can be attaced ( by glue or tape ) to the side of the PRUSA surplied parts. Each plug can have a 4mm OD bowden tube press fitted into it, and the chamfered tip allows the filament to re enter the tube when ejected from the hot end... ( hopefully). The plug can then be removed to acssess the filament end for easy removal.
This I feel this is useful for people using their own dry box systems, to easily get to any filament stuck within the sensor, if they are using the run out / use next roll function. The Prusa XL does this well and it does not attempt to run the end of the filament backwards through the sensor.
I haven't been able to tested this yet, but when my CoreOneplus INDX system finally gets to me, (Maybe late August/September) I will and will make any ammendments available here.