Clock TM 1637 Digi Display and Buzzer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact two-piece enclosure designed for a TM1637 4-digit display and a Wemos D1 R1 (ESP8266). Perfect for DIY clocks,
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This enclosure is designed for DIY clock and display projects using a TM1637 4-digit LED display and a Wemos D1 R1 (ESP8266) development board. TM1637 modules are commonly used for digital clocks and numeric displays with ESP8266-based projects.
The enclosure features a modern two-piece design with a removable rear cover for easy assembly and maintenance. The recessed front opening provides a clean finish around the display, while the compact design keeps the electronics protected.
Features
Designed for TM1637 4-digit LED display
Compatible with Wemos D1 R1 (ESP8266)
Two-piece enclosure
Removable rear cover
Clean recessed display window
Compact and modern design
Easy assembly with screws
Support-free 3D printing
Applications
Digital clock
Desk clock
Home automation display
IoT projects
ESP8266 development
DIY electronics
Printing Recommendations
Material: PLA, PETG, ABS, or ASA
Layer Height: 0.20 mm
Perimeters: 3–4
Infill: 20–30%
Supports: Not required
Print both parts with their largest flat surfaces on the build plate for the best surface quality.