Summit Fishing Transducer Pole spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom spacers for Summit Fishing transducer poles to prevent wobbling, while allowing the shaft to turn freely.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Created this simple spacer model for my dads Summit Fishing transducer pole. The spacer allows the shaft to turn freely, while preventing wobbling. While I have added a few standard lengths, we ended up going with the 100mm spacer for his specific needs.
The spacers inner diameter is 33.6mm.
Print settings:
Layer height: 0.20mm
Infill: 100%
Wall loops: 3
Top/Bottom Shells: 3
No supports
Use brim if there is any adhesion issues.
Print in ASA to get maximum strength and UV/weather resistance.
*I have not had a chance to test these models yet