Marley 40 mm Inspection Eye Cap Replacement (South Africa)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After discovering that replacement caps are almost impossible to buy separately, I reverse-engineered the original threa
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Marley 40 mm Inspection Eye Cap Replacement (South Africa)
Lost your Marley inspection eye cap? I did too.
After discovering that replacement caps are almost impossible to buy separately, I reverse-engineered the original thread and designed this direct replacement for the Marley 40 mm waste inspection bend.
The cap has been physically tested on an original Marley fitting and screws on smoothly with an OEM-like fit.
Features
Direct replacement for Marley 40 mm inspection eye caps
Reverse-engineered thread profile
Factory-style hex head for easy tightening and removal
Clean, OEM-inspired appearance
No supports required
Quick print
Tested on a genuine Marley fitting
Recommended material:
ASA (best)
ABS
PETG
PLA/PLA+ suitable for testing or indoor use only (HT PLA might be okay for sun exposure)
Recommended settings:
0.6 mm nozzle0.2 mm layer height
4 walls
60 - 100% infill
Print upright
No supports required
Compatibility
Designed and tested for:
Marley 40 mm Waste Inspection EyeMarley 87.5° Waste Bend with Inspection Opening
Compatibility with other manufacturers has not been verified.
Design Notes
This model was created by reverse engineering an original Marley fitting.
The final thread geometry that produced the correct fit was:
Internal diameter: 33.0 mmCoil diameter: 33.8 mm
Pitch: 3.03 mm
Circular section
Section size: 1.5 mm
If you're modifying this model in Fusion 360, these dimensions should save you a lot of trial and error.
VersionVersion: 1.0
DisclaimerThis model is an independently designed replacement part intended to fit genuine Marley plumbing fittings. It is not manufactured, endorsed, or affiliated with Marley. "Marley" is used only to describe compatibility with the original plumbing component.