1 / 14
Arduino starter kit oranizers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Orgaziers for Arduino starter kit
- Ocena
- 4 / 5
- Polubienia
- 55
- Pobrania
- 276
- Wydruki
- 2
- Wyświetlenia
- 1465
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (104)Powiązane
- This is my creation of organizers for Arduino starter kit. I measured, tested and created this. As first it was a gift for my friend for his birthday, but then i printed it for me too. If you have only the starter kit, everything fits in there except for the Projects manual and USB-B cable for uploading projets into arduino. Those boxes are very compatible, so every box can be stacked on each other.
- !! PINS AND HOLES ARE ONLY FOR SUPPORT, PINS AND HOLES DON´T HAVE ENOUGH FRICTION TO STAY TOGETHER !!
- I printed it on 0,4 mm nozzle with 0,3 mm diameter of filament and 10% infill.
- Total print time is about 32 h and you will need about 200 meters of filament.
- This design is free to use and copy, just mention/refer it´s a addon for my model. If you want to create another level/drawer, you can. There are diameters of my parts or you can use .f3d files to open each part and measure it from them.
