Backbit Chip Tester Pro V2 - Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the above mentioned Cip Tester by Backbit. It is designed for the V2 version of the tester.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This case is made to store the Chip Tester Pro V2 by Backbit. The idea is to have a rigid case (PETG as shown in the picture) with a softer inlay (TPU90) and a lit that stays in place by the help of magnets (8x3mm)
The 3mf contains all parts in place, it needs just the desired filament to be assigned. You can split the object and print all parts separately. I've printed the TPU part directly into the PETG case (using a 2 nozzle printer) but the part can be printed and inserted later (may lead to fitting issues, depending on printer accuracy)
It is indeed possible to print the TPU part using any other material (even the same as the case itself).
Align the magnets accordingly, best way is to insert the magnets into the case then stack one magnet above the already inserted magnet and press the lid onto it. This ensures that all magnets are in an attracting alignment.